Washer Dryer Help All Topics

Choose the best option below to describe the issue you are having with your washer dryer.

Thank you for using the Argos Troubleshooter.

 

If there is anything else you would like help with today, simply click Finish to return to the home page of the diagnostics support tool.

 

 

 

 

For more support check out the product support page on https://argos-support.co.uk for manuals, interactive guides, live chat, FAQs and more.

 

 

Or watch our helpful how-to videos on the Argos Support YouTube channel http://www.youtube.com/ArgosSupport

Sorry we haven't been able to fix this issue with the Troubleshooter today.

 

For further assistance, please close this window and call Technical Support using the number provided on the product support page or inside the user manual.

 

For more support check out the product support page on https://argos-support.co.uk

 

Here you can find manuals, interactive guides, live chat, FAQs and much more.
Or watch our helpful how-to videos on the Argos Support YouTube channel at https://www.youtube.com/c/ArgosSupport

If your washer dryer is not filling with water or filling slowly. This may be due to a insufficient water pressure.



Can you here a buzzing noise coming from the washer dryer?

You will need to check both the water inlet pipe and the mains water connections. This are usually located behind the washer dryer.


Washer dryers are heavy, you may need assistance to move it.

Please check your washer dryer manual for this procedure.

Check the Power button on the washer dryer is on.

The mains power may be on to the washer dryer, but you may need to select a wash programme for the washer dryer to appear on.



Do you now have power?

Is the washer dryer plugged in to the mains power and switched on?

To cross test the power supply try another electrical appliance in the same mains socket.



Does the other appliance power on?

Try changing the fuse in the plug. Always use a new fuse with the same Amp rating as the fuse being removed.



Does the washer dryer now have power?

Check to see if any RCD breakers have been tripped inside your Fusebox.



Have any switches been tripped?

Switch the washer dryer on at the mains and press the power button on the appliance, or turn the programme knob to select a wash cycle.



Is the washer dryer now on?

Make sure the water inlet pipe from your washer dryer is not damaged, kinked or trapped under or behind any appliances or cabinets, as this may restrict the water flow.



Please check your washer dryer manual for this procedure.

Was the water inlet pipe damaged, kinked or trapped in any way?

Locate and fully open the mains water inlet tap. Check the water connection is fitted correctly.

Fully opening the mains water tap allows the maximum amount of water to supply the washer dryer.



Please check your washer dryer manual for this procedure.

Try your washer dryer again.

Does this fix the problem?

Check the water supply to the house, the stop cock is usually found either in the kitchen under the sink or in a larder. The stop cock can also sometimes be in the front porch.

Ensure the stop cock is in the open position.

Try the washer dryer again.

Does this fix the problem?

The first thing to check is if there is power to the washer dryer.



Do you have power to the washer dryer, are the LED lights on?

Make sure the washer dryer is plugged in and switch on at the mains.

Press the Power button.



Is there power to the washer dryer?

Check the programme selection knob is set to the correct/ desired programme and not set to the Off position.

Re-select the desired programme.

Please check your washer dryer manual for this procedure.

Does the washer dryer now start?

Open and firmly re-close the door. The door should click when closed, this is the lock on the door to ensure it doesn't open during the wash cycle.



Does the washer dryer now start?

Switch the tripped fuse back on.



Does it stay in the ON position?

Try the power again.



Do you now have power?

If a delay timer has been set, the washer dryer will not commence until the timer has finished.

Check if a delay timer has been set.



Please check your washer dryer manual for this procedure.

Does the washer dryer now start?

Open and firmly re-close the door. The door should click when closed, this is the lock on the door to ensure it doesn't open during the wash cycle.

Do you now have power?

Check that the washer dryer is plugged in and turned on at the mains.



Is the control panel now responsive?

Switch the washer dryer off at the mains and remove the plug.

Leave for 5 minutes. Plug the washer dryer back into the mains and switch on.

Is the control panel now responsive?

To cross test the power supply try another electrical appliance on the same mains socket.



Does the other appliance power on?

Try changing the fuse on the plug. Always use a new fuse with the same Amp rating as the fuse being removed.



Do you have power?

Is the control panel now responsive?

Check to see if any RCD breakers have been tripped inside your Fusebox.



Have any switches been tripped?

Switch the tripped fuse back on.



Does it stay in the ON position?

Choose the best option to describe the issue you are having with your washer dryer.

Thank you for using the Argos Troubleshooter.

 

If there is anything else you would like help with today, simply click Finish to return to the home page of the diagnostics support tool.

 

 

 

 

For more support check out the product support page on https://argos-support.co.uk for manuals, interactive guides, live chat, FAQs and more.

 

 

Or watch our helpful how-to videos on the Argos Support YouTube channel http://www.youtube.com/ArgosSupport

Sorry we haven't been able to fix this issue with the Troubleshooter today.

 

For further assistance, please close this window and call Technical Support using the number provided on the product support page or inside the user manual.

 

For more support check out the product support page on https://argos-support.co.uk

 

Here you can find manuals, interactive guides, live chat, FAQs and much more.
Or watch our helpful how-to videos on the Argos Support YouTube channel at https://www.youtube.com/c/ArgosSupport

If your washer dryer is very noisy when in use it is recommended that you stop the wash cycle straight away to avoid any potential damage to the washer dryer.



Vibrations can be caused by a number of different things, click Diagnose to begin troubleshooting this issue.

The washer dryer needs to be positioned on a solid, level surface, such as a concrete floor.

• Avoid placing the washer dryer upon soft flooring such as carpets.
• Try gently rocking the washer dryer to determine if it is sat level on the floor.
• You may need to adjust the feet in to ensure the washer dryer sits level.

Please check your washer dryer manual for this procedure.

Is the washer dryer level and balanced?

Ensure there is an adequate clearance gap around the washer dryer, as during the wash cycle the washer dryer will move and vibrate.

Check the user manual for specific clearance gaps required for your washer dryer.



Is there adequate clearance around the washer dryer?

The transit bolts hold the drum in place for transportation, without these being removed the drum will not spin and damage may be caused to the washer dryer.

The transit bolts are located on the rear of the washer dryer, washer dryers are heavy you may need assistance to move it.

Locate the transit bolt holes (there are usually 4 bolts) and check to see if they have metal bolts or plug plugs covering the holes.


Please check your washer dryer manual for this procedure.

Have the transit bolts been removed from the washer dryer?

To level the washer dryer you will need to adjust the feet. You will probably need to pull the washer dryer out to access the feet.

The washer dryer is heavy, you may need assistance to move it.

• Pull out and tilt the washer dryer back to gain access to the feet.
• Loosen the foot and plastic adjustment nut.
• Adjust the foot as necessary.
• Re-tighten the plastic adjustment nut locking the adjusted foot in position.
• Lower the washer dryer check it is level and sat firmly on the floor (no rocking).
• Move back into place and retest.

Please check your washer dryer manual for this procedure.

Does the noise now stop?

Knowing where the water is leaking from can help diagnose where the problem originates from.



Where is the water leaking from?

Check the door seal for build ups of limescale, fibres and debris that may have built up over time (especially in hard water areas). This debris can prevent the door from making a water tight seal and cause leaking.




Clean any dirt or debris from the doors and seals with warm soapy water.

Has the leaking stopped?

A water leak coming from behind or below the washer dryer is likely to be from either the mains water inlet connections or from the connection to the waste pipe.

If you notice the leak during the first part of your wash cycle, for example when the washer dryer is filling, shortly after the programme has started, the source of the leak is most likely from the water inlet.

If the leak is noticed later on, for example when the appliance is in its spin or drain cycle, the source of the leak is most likely from the drainage connection.



If you know when it started leaking, pick the correct option below.

Check the mains water inlet connection to the washer dryer. Washer dryers are heavy, you may need assistance in moving it.

• Close the mains water valve to stop the water supply.
• Remove the water inlet pipe from the mains connection.
• Inspect the connection and if necessary clean any debris or dirt from the inlet hose filter.
• Make sure the mains water connection is correctly and firmly re-attached to the mains water system.
• Open the mains water valve.
• Run a short cycle to check for leaks.

Please check your washer dryer manual for this procedure.

Has the leak now stopped?

If possible create some more space around your washer dryer, to reduce the chance of it vibrating against adjacent objects whilst in use.

Also try to avoid putting anything on top of the washer dryer and avoid leaning items against it.



Try the washer dryer again, has the noise stopped?

Locate and remove transit bolts, the washer dryer is heavy you may need assistance in moving it to gain access.

• Using a spanner, turn the transit bolt anti-clockwise to loosen.
• Continue turning the transit bolt anti-clockwise with a spanner or by hand.
• Remove the transit bolt.
• Insert the provided plastic hole plug into the transit bolt hole.
• Repeat for the remaining transit bolts.
• Replace the appliance.
• Re-try a wash cycle.

Please check your washer dryer manual for this procedure.

Has the noise stopped?

The washer dryer requires the wash load to be correctly balanced.



You may need to open the door and separate the clothes to continue with the cycle.

Does the spin cycle now work?

The top of the drain hose may be too low, it must be fitted at a height between 65 and 100 cm from the floor.



Please check your washer dryer manual for this procedure.

Is the drain hose crook fitted at the correct height?

Keeping the holes of the dispenser clean will ensure the soap and fabric conditioner flush away efficiently.

• You may need to pause or stop the wash cycle.
• Make sure the detergent drawer is clean and free from debris.
• Check the compartment water outlets are not blocked.

Continue the wash cycle.



Please check your washer dryer manual for this procedure.

Has the leaking stopped?

If the washer dryer is not leveled correctly and is leaning slightly forward, it may result in water and foam leaking from the detergent drawer.

• The washer dryer needs to be positioned on a solid, level surface, such as a concrete floor.
• Avoid placing the appliance upon soft flooring such as carpets.
• Try gently rocking the appliance to determine if it is sat level on the floor.
• You may need to adjust the feet in to ensure the washer dryer sits level.

Please check your washer dryer manual for this procedure.

Is the washer dryer level and balanced?

Sometimes the water pressure of your cold water system can be too high, forcing water into the washer dryer faster than it can use it.

Try reducing the water pressure by slightly closing the the water inlet valve that supplies the washer dryer.

Does the leaking stop?

To level the washer dryer you will need to adjust the feet. You will probably need to pull the washer dryer out to access the feet. The washer dryer is heavy, you may need assistance to move it.

• Pull out and tilt the washer dryer back to gain access to the feet.
• Loosen the foot and plastic adjustment nut.
• Adjust the foot as necessary.
• Re-tighten the plastic adjustment nut locking the adjusted foot in position.
• Lower the appliance check it is level and sat firmly on the floor (no rocking).
• Move back into place and retest.

Please check your washer dryer manual for this procedure.

Has the leak stopped?

Was a spin cycle selected as part of the wash cycle? To double check try running a new spin cycle.



Does the washer dryer spin?

Can you see any water stuck in the drum of the washer dryer?



Leave for a short while to make sure the machine has finished its wash cycle fully.

Has the washer dryer drained?

You may need to manually drain the washer dryer, prepare the area before you start. You may need a shallow dish, bowl or towels to catch the water draining from the washer dryer.

Check the pump filter for blockages:

• Open the pump filter cover to access the pump filter.
• Place a container or towel below or as close to the pump filter housing as you can, upon opening the pump filter it will release any water still in the machine.
• Twist the pump filter anti-clockwise to unlock it from its housing, the water stuck in the washer dryer will now begin to empty out.
• Clean away any debris trapped inside the pump filter housing and replace, twisting the pump filter clockwise to lock it in to place.
• Replace the pump filter cover.

Please check your washer dryer manual for this procedure.

Has this fixed the issue?

Before checking the set up of your drainage connection, we first need to understand how your waste pipe is connected to the mains drainage.

There are several ways your waste could be connected:

• Into a standpipe - the drainage pipe is pushed down into a vertical pipe that is connected to the mains.
• On to a waste pipe spigot - the drainage hose is pushed firmly on to a drainage connection and is usually found under the sink.
• If no drain connections are available, you can also hang the drainage pipe into a sink to empty, using the supplied drainage hook.

Please choose the correct drainage setup you have to help diagnose the problem.

You probably need to pull the washer dryer out to get to the drainage connection, the washer dryer is heavy you may need assistance to move it.

Ensure your drainage hose is correctly inserted in to the standpipe :

• The support hoop supplied should be used to keep the top of the drain hose above the height of the washing machine drum (between 60 — 100cm above the floor).
• The waste pipe should not be pushed all the way to the bottom of the standpipe as this may restrict the flow of water away from the washer dryer.

Please check your washer dryer manual for this procedure.

Run a short cycle to test, has this fixed the issue?

The spigot connection is usually located close to your sink waste connection, ensure the drainage hose is connected correctly.

• Ensure the support crook is used -The support hoop supplied should be used to keep the top of the drain hose above the height of the washer dryer drum (between 60 — 100cm above the floor).

• Check there is no blanking cap on the spigot - If this is the first time there has been a washer dryer attached to the waste pipes, you may have to remove a blanking cap.

Types of blanking cap you might find:

• A blanking cap installed in between the spigot and the u-bend.
• The spigot is manufactured sealed and you will need to cut the blanking end off with a saw.
• Or a simple cap/plug over the end of the pipe.

Please check your washer dryer manual for this procedure.

Run a short cycle to test, has this fixed the issue?

The end of the drain hose may have been pushed too far down the standpipe, the ‘U’ bracket or hose ‘crook’ should be fitted 100 mm from the end of the drain hose. The drain hose should not touch the bottom of the standpipe.

Correctly attach the drainage house as per the user manual for your washer dryer.

Run a short cycle to test, has the problem been fixed?

Your drain hose should be attached to the wall between 65 - 100cm from the floor, secured using a drain support crook.



Adjust the drain hose to the correct position.

Run a short cycle to test, has the problem been fixed?

Can you see any error code, or fault light indicators on?

Please check the user manual for your specific error codes and what they mean.

 

Thank you for using the Argos Troubleshooter.

 

 

If there is anything else you would like help with today, simply click Finish to return to the home page of the diagnostics support tool.

 

For more support check out the product support page on https://argos-support.co.uk for manuals, interactive guides, live chat, FAQs and more.

Please choose the error code from the options provided.

The door is not shut properly

Close the washer dryer door ensuring you hear a click, this is the door catch locking.

Does the error clear?

Water pressure issue

The pressure of the water supply may be low or the water supply may be blocked. Ensure that the water inlet tap is fully turned on. This may be located behind the washer dryer.

Washer dryers are heavy you may need assistance to move it.

Does the error clear?

Water Drain Error
The water is not draining away either at all or too slow, triggering this error.

You may need to manually drain the washer dryer, prepare the area before you start. You may need a shallow dish, bowl or towels to catch the water draining from the appliance.

Check the pump filter for blockages:

• Open the pump filter cover to access the pump filter.
• Place a container or towel below or as close to the pump filter housing as you can, upon opening the pump filter it will release any water still in the machine.
• Twist the pump filter anti-clockwise to unlock it from its housing, the water stuck in the machine will now begin to empty out.
• Clean away any debris trapped inside the pump filter housing and replace, twisting the pump filter clockwise to lock it in to place.
• Replace the pump filter cover.

Does the error clear?

Thank you for using the Argos Troubleshooter.

 

If there is anything else you would like help with today, simply click Finish to return to the home page of the diagnostics support tool.

 

 

 

 

For more support check out the product support page on https://argos-support.co.uk for manuals, interactive guides, live chat, FAQs and more.

 

 

Or watch our helpful how-to videos on the Argos Support YouTube channel http://www.youtube.com/ArgosSupport

Sorry we haven't been able to fix this issue with the Troubleshooter today.

 

For further assistance, please close this window and call Technical Support using the number provided on the product support page or inside the user manual.

 

For more support check out the product support page on https://argos-support.co.uk

 

Here you can find manuals, interactive guides, live chat, FAQs and much more.
Or watch our helpful how-to videos on the Argos Support YouTube channel at https://www.youtube.com/c/ArgosSupport

cKjhkh

ljklkj

You will need to check the water inlet pipe filters and the mains water connections.

This may be located behind the washer dryer. Washer dryers are heavy you may need assistance to move it.

• Turn the mains water inlet tap off.
• Remove the water inlet pipe.
• Inspect and clean the water inlet filter.
• Replace the filter.
• Re-connect mains water supply and turn on.
• Try the washer dryer again.

Does the error now clear?

The washer dryer requires the wash load to be correctly balanced.

You may need to open the door and separate the clothes to continue with the cycle.

After doing this does the error clear?