Washing Machine Help All Topics

What is the issue you are having?
Choose the best option to describe the issue you are having with your appliance.

Resolved! But before you go
Thank your for using the Argos self-diagnostic tool.

If there is anything else you would like help with today, simply click Finish to return to the home page of the diagnostics support tool.

For more support check out the product support page on https://argos-support.co.uk for manuals, interactive guides, live chat, FAQs and more.


Or watch our helpful how-to videos on the Argos Support YouTube channel.

Call Tech Support

Sorry we haven't been able to fix this issue with the Troubleshooter today.

 

For further assistance, please close this window and call Technical Support using the number provided on the Argos product support page or inside the user manual.

 

For more support check out the product support page on https://argos-support.co.uk

 

Here you can find manuals, interactive guides, live chat, FAQs and much more.
Or watch our helpful how-to videos on the Argos Support YouTube channel at https://www.youtube.com/c/ArgosSupport


Check the pump filter
You may need to manually drain the machine, prepare the area before you start. You may need a shallow dish, bowl or towels to catch the water draining from the appliance.

Check the pump filter for blockages:
  • Open the pump filter cover to access the pump filter.
  • Place a container or towel below or as close to the pump filter housing as you can, upon opening the pump filter it will release any water still in the machine.
  • Twist the pump filter anti-clockwise to unlock it from its housing, the water stuck in the machine will now begin to empty out.
  • Clean away any debris trapped inside the pump filter housing and replace, twisting the pump filter clockwise to lock it in to place.
  • Replace the pump filter cover.
  • Open the door and ensure that laundry loose in the drum, this may cause a unbalanced load and stop the spin and drain cycles.
Watch our How-to video for cleaning the pump filter or see how to do it step by step.

Run a short cycle, has the blockage cleared?
Check drainage hose
Make sure you have unblocked the pump filter and drained any water from the appliance.

Pull the appliance out to gain access, the machine is heavy you may need assistance to move it.
Make sure the drainage hose from your appliance is not damaged, kinked or trapped under or behind any appliances or cabinets.




Was the pipe obstructed in anyway?
Check for blockage
You will need to carefully remove the drainage hose from its mains waste connection and check to see if there is any obstruction to the hose or the pipe it is connecting to.

If you have the waste connected to a spigot under the sink, check the blanking cap has been removed from the connection.



Are there any blockages?



Clear waste pipe obstruction
  • Clear any kinks or bends and ensure it does not get trapped against or behind the appliance or adjacent cabinets when pushing the appliance back in.
  • Run a short cycle to test from blockages.

Does the appliance now drain?
Clear waste pipe blockage
  • Clear any debris blocking the waste pipe.
  • Check the connection to the mains is also clean and free from debris.
  • Re-connect the waste pipe.
  • Run a short cycle to test for blockages.

Does the appliance now drain?
Check the wash cycle lights
Check that the wash cycle has fully finished.

Once the drum comes to rest at the end of the cycle the door will remain locked for up to 5 minutes before releasing the catch to enable the door to be opened. This is a safety feature and not a fault with the appliance.



Is the Door open light on?
Check child lock
  • If your appliance has a child lock feature check that this has not be switched on.
  • Make sure the child lock is off.

Try opening the door again.

Does the door now open?
Wait for cycle to finish
Wait for cycle to finish.

Once the drum comes to rest at the end of the cycle the door will remain locked for up to 5 minutes before releasing the catch to enable the door to be opened. This is a safety feature and not a fault with the appliance.

Does the door now open?
Power Reset
Switch the appliance off at the mains for 5 minutes, then switch it back on again and try to open the door again.

(If the problem persist on your next wash cycle or again in the future please contact customer support.)

Does the door now open?
Is the appliance level?
The appliance needs to be positioned on a solid, level surface, such as a concrete floor.
  • Avoid placing the appliance upon soft flooring such as carpets.
  • Try gently rocking the appliance to determine if it is sat level on the floor.
  • You may need to adjust the feet in to ensure the appliance sits level.


Is the appliance level and balanced?
Level the appliance
To level the appliance you will need to adjust the feet. You will probably need to pull the appliance out to access the feet. The appliance is heavy, you may need assistance to move it.
  • Pull out and tilt the appliance back to gain access to the feet
  • Loosen the foot and plastic adjustment nut
  • Adjust the foot as necessary.
  • Re-tighten the plastic adjustment nut locking the adjusted foot in position
  • Lower the appliance check it is level and sat firmly on the floor (no rocking)
  • Move back into place and retest.


Does the noise now stop?
Clean detergent drawer
text to follow and tmtx link
Check the wash cycle lights
Check that the wash cycle has fully finished.

Wait a further 5 minutes or until the door open light is on. Then try to open the door again.

Does the door now open?
What is the issue you are having?
Choose the best option to describe the issue you are having with your appliance.


Resolved! But before you go
Thank your for using the Argos self-diagnostic tool.

If there is anything else you would like help with today, simply click Finish to return to the home page of the diagnostics support tool.


For more support check out the product support page on https://argos-support.co.uk for manuals, interactive guides, live chat, FAQs and more.


Or watch our helpful how-to videos on the Argos Support YouTube channel.

Call Tech Support

Sorry we haven't been able to fix this issue with the Troubleshooter today.

 

For further assistance, please close this window and call Technical Support using the number provided on the Argos product support page or inside the user manual.

 

For more support check out the product support page on https://argos-support.co.uk

 

Here you can find manuals, interactive guides, live chat, FAQs and much more.
Or watch our helpful how-to videos on the Argos Support YouTube channel at https://www.youtube.com/c/ArgosSupport


Noisy or Vibrating
If your washing machine is very noisy when in use it is recommended that you stop the wash cycle straight away to avoid any potential damage to the appliance.



Vibrations can be caused by a number of different things, click Diagnose to begin troubleshooting this issue.
Is the appliance level and balanced?
The appliance needs to be positioned on a solid, level surface, such as a concrete floor.
  • Avoid placing the appliance upon soft flooring such as carpets.
  • Try gently rocking the appliance to determine if it is sat level on the floor.
  • You may need to adjust the feet in to ensure the appliance sits level.


Is the appliance level and balanced?
Is there adequate clearance?
Ensure there is an adequate clearance gap around the washing machine, as during the wash cycle the appliance will move and vibrate. Check the user manual for specific clearance gaps required for your appliance.



Is there adequate clearance around the appliance?
Transit bolts removed?
The transit bolts hold the drum in place for transportation, without these being removed the drum will not spin and damage may be caused to the appliance.

The transit bolts are located on the rear of the appliance, washing machines are heavy you may need assistance to move it.

Locate the transit bolt holes (there are usually 4 bolts) and check to see if they have metal bolts or plug plugs covering the holes.



Have the transit bolts been removed from the appliance?
Level the appliance
To level the appliance you will need to adjust the feet. You will probably need to pull the appliance out to access the feet. The appliance is heavy, you may need assistance to move it.
  • Pull out and tilt the appliance back to gain access to the feet.
  • Loosen the foot and plastic adjustment nut.
  • Adjust the foot as necessary.
  • Re-tighten the plastic adjustment nut locking the adjusted foot in position.
  • Lower the appliance check it is level and sat firmly on the floor (no rocking).
  • Move back into place and retest.


Does the noise now stop?
Where is the water leaking from?
Knowing where the water is leaking from can help diagnose where the problem originates from.



Where is the water leaking from?
Check the door seals
Check the door seal for build ups of limescale, fibres and debris that may have built up over time (especially in hard water areas). This debris can prevent the door from making a water tight seal and cause leaking.




Clean any dirt or debris from the doors and seals with warm soapy water.

Has the leaking stopped?
When did you notice the leak?
A water leak coming from behind or below the appliance is likely to be from either the mains water inlet connections or from the connection to the waste pipe.

If you notice the leak during the first part of your wash cycle, for example when the machine is filling, shortly after the programme has started, the source of the leak is most likely from the water inlet.

If the leak is noticed later on, for example when the appliance is in its spin or drain cycle, the source of the leak is most likely from the drainage connection.



If you know when it started leaking, pick the correct option below.
Water leaking - check water inlet
Check the mains water inlet connection to the appliance. Washing machines are heavy, you may need assistance in moving it.
  • Close the mains water valve to stop the water supply.
  • Remove the water inlet pipe from the mains connection.
  • Inspect the connection and if necessary clean any debris or dirt from the inlet hose filter.
  • Make sure the mains water connection is correctly and firmly re-attached to the mains water system. 
  • Open the mains water valve.
  • Run a short cycle to check for leaks.

Has the leak now stopped?
Improve clearance
If possible create some more space around your appliance, to reduce the chance of the appliance vibrating against adjacent objects whilst in use. Also try to avoid putting anything on top of the appliance and avoid leaning items against it.



Try the appliance again, has the noise stopped?
Remove transit bolts
Locate and remove transit bolts, the appliance is heavy you may need assistance in moving it to gain access.

  • Using a spanner, turn the transit bolt anti-clockwise to loosen.
  • Continue turning the transit bolt anti-clockwise with a spanner or by hand.
  • Remove the transit bolt.
  • Insert the provided plastic hole plug into the transit bolt hole.
  • Repeat for the remaining transit bolts.
  • Replace the appliance.
  • Re-try a wash cycle.

Has the noise stopped?
Check - unbalanced load
The washing machine requires the wash load to be correctly balanced.

You may need to open the door and separate the clothes to continue with the cycle.

Does the spin cycle now work?

Is the drain hose fitted at correct height?
The top of the drain hose may be too low, it must be fitted at a height between 65 and 100 cm from the floor.



Is the drain hose crook fitted at the correct height?
Water leaking from detergent drawer
Keeping the holes of the dispenser clean will ensure the soap and fabric conditioner flush away efficiently.
  • You may need to pause or stop the wash cycle.
  • Make sure the detergent drawer is clean and free from debris.
  • Check the compartment water outlets are not blocked.
Continue the wash cycle.

Has the leaking stopped?
Is the appliance level?
If the appliance is not levelled correctly and is leaning slightly forward, it may result in water and foam leaking from the detergent drawer.
  • The appliance needs to be positioned on a solid, level surface, such as a concrete floor.
  • Avoid placing the appliance upon soft flooring such as carpets.
  • Try gently rocking the appliance to determine if it is sat level on the floor.
  • You may need to adjust the feet in to ensure the appliance sits level.
Is the appliance level and balanced?
Reduce water pressure
Sometimes the water pressure of your cold water system can be too high, forcing water into the appliance faster than it can use it.

Try reducing the water pressure by slightly closing the the water inlet valve that supplies the appliance.

Does the leaking stop?
Level the appliance
To level the appliance you will need to adjust the feet. You will probably need to pull the appliance out to access the feet. The appliance is heavy, you may need assistance to move it.
  • Pull out and tilt the appliance back to gain access to the feet.
  • Loosen the foot and plastic adjustment nut.
  • Adjust the foot as necessary.
  • Re-tighten the plastic adjustment nut locking the adjusted foot in position.
  • Lower the appliance check it is level and sat firmly on the floor (no rocking).
  • Move back into place and retest.

Has the leak stopped?
Try running a new spin cycle
Was a spin cycle selected as part of the wash cycle? To double check try running a new spin cycle.



Does the washing machine spin?
Appliance drained?
Can you see any water stuck in the drum of the appliance?

Leave for a short while to make sure the machine has finished its wash cycle fully.

Has the appliance drained?
Check Pump Filter
You may need to manually drain the machine, prepare the area before you start. You may need a shallow dish, bowl or towels to catch the water draining from the appliance.

Check the pump filter for blockages:
  • Open the pump filter cover to access the pump filter.
  • Place a container or towel below or as close to the pump filter housing as you can, upon opening the pump filter it will release any water still in the machine.
  • Twist the pump filter anti-clockwise to unlock it from its housing, the water stuck in the machine will now begin to empty out.
  • Clean away any debris trapped inside the pump filter housing and replace, twisting the pump filter clockwise to lock it in to place.
  • Replace the pump filter cover.


Does the appliance now spin/ drain?
Check drainage set up
Before checking the set up of your drainage connection, we first need to understand how your waste pipe is connected to the mains drainage.

There are several ways your waste could be connected:
  • Into a standpipe - the drainage pipe is pushed down into a vertical pipe that is connected to the mains.
  • On to a waste pipe spigot - the drainage hose is pushed firmly on to a drainage connection and is usually found under the sink.
  • If no drain connections are available, you can also hang the drainage pipe into a sink to empty, using the supplied drainage hook.

Please choose the correct drainage setup you have to help diagnose the problem.
Check Standpipe
You probably need to pull the appliance out to get to the drainage connection, the appliance is heavy you may need assistance to move it.

Ensure your drainage hose is correctly inserted in to the standpipe :
  • The support hoop supplied should be used to keep the top of the drain hose above the height of the washing machine drum (between 60 — 100cm above the floor).
  • The waste pipe should not be pushed all the way to the bottom of the standpipe as this may restrict the flow of water away from the appliance.
Run a short cycle to test, has this fixed the issue?
Check spigot
The spigot connection is usually located close to your sink waste connection, ensure the drainage hose is connected correctly.

  • Ensure the support crook is used -The support hoop supplied should be used to keep the top of the drain hose above the height of the washing machine drum (between 60 — 100cm above the floor).
  • Check there is no blanking cap on the spigot - If this is the first time there has been a washing machine attached to the waste pipes, you may have to remove a blanking cap.

Types of blanking cap you might find:
  • A blanking cap installed in between the spigot and the u-bend.
  • The spigot is manufactured sealed and you will need to cut the blanking end off with a saw.
  • Or a simple cap/plug over the end of the pipe.

Run a short cycle to test, has this fixed the issue?
Check Standpipe
The end of the drain hose may have been pushed too far down the standpipe, the ‘U’ bracket or hose ‘crook’ should be fitted 100 mm from the end of the drain hose. The drain hose should not touch the bottom of the standpipe.

Correctly attach the drainage house as per the user manual for your appliance.

Run a short cycle to test, has the problem been fixed?
Adjust drain hose height
Your drain hose should be attached to the wall between 65 - 100cm from the floor, secured using a drain support crook.



Adjust the drain hose to the correct position.

Run a short cycle to test, has the problem been fixed?


Any error or fault lights?
Can you see any error or fault light indicators on?
What's the error code?
Please choose the error code from the options provided.

E1
The door is not shut properly

Close the appliance door ensuring you hear a click, this is the door catch locking.

Does the error clear?
E2
Water pressure issue

The pressure of the water supply may be low or the water supply may be blocked. Ensure that the water inlet tap is fully turned on. This may be located behind the washing machine.

Washing machines are heavy you may need assistance to move it.

Does the error clear?
E3
Water Drain Error
The water is not draining away either at all or too slow, triggering this error.

You may need to manually drain the machine, prepare the area before you start. You may need a shallow dish, bowl or towels to catch the water draining from the appliance.

Check the pump filter for blockages:
  • Open the pump filter cover to access the pump filter.
  • Place a container or towel below or as close to the pump filter housing as you can, upon opening the pump filter it will release any water still in the machine.
  • Twist the pump filter anti-clockwise to unlock it from its housing, the water stuck in the machine will now begin to empty out.
  • Clean away any debris trapped inside the pump filter housing and replace, twisting the pump filter clockwise to lock it in to place.
  • Replace the pump filter cover.
Does the error clear?
How to fix - step by step
Resolved! But before you go
Thank your for using the Argos self-diagnostic tool.

If there is anything else you would like help with today, simply click Finish to return to the home page of the diagnostics support tool.


For more support check out the product support page on https://argos-support.co.uk for manuals, interactive guides, live chat, FAQs and more.


Or watch our helpful how-to videos on the Argos Support YouTube channel.

Call Tech Support

Sorry we haven't been able to fix this issue with the Troubleshooter today.

 

For further assistance, please close this window and call Technical Support using the number provided on the Argos product support page or inside the user manual.

 

For more support check out the product support page on https://argos-support.co.uk

 

Here you can find manuals, interactive guides, live chat, FAQs and much more.
Or watch our helpful how-to videos on the Argos Support YouTube channel at https://www.youtube.com/c/ArgosSupport


Check for blockage
cKjhkh
Check drainage set up
ljklkj
Check water inlet filters
You will need to check the water inlet pipe filters and the mains water connections. This may be located behind the washing machine. Washing machines are heavy you may need assistance to move it.

  • Turn the mains water inlet tap off.
  • Remove the water inlet pipe.
  • Inspect and clean the water inlet filter.
  • Replace the filter.
  • Re-connect mains water supply and turn on.
  • Try the washing machine again.
Does the error now clear?
Unbalanced Load
The washing machine requires the wash load to be correctly balanced.

You may need to open the door and separate the clothes to continue with the cycle.

After doing this does the error clear?